Jump to content
osx86.org

Asus K55VM Guide 3.0

Sign in to follow this  

About This File

This is a guide to install Mac OSX on a Asus K55VM
 
Specifications:

Processor               : Intel® Core i7-3610QM Processor (6M Cache, 2.30 GHz)

Graphics Processor(GPU) : Intel® HD 4000 and NVIDIA® Optimus GeForce® GT 630M

Chipset                 : Intel® HM76 Express Chipset

Hard disk               : Hitachi 500GB 5400rpm HDD 

RAM                     : 8GB DDR3 1600 MHz SDRAM

Wifi                    : Atheros AR9485 Wireless Network Adapter

LAN                     : Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter

Audio                   : Realtek® High Definition Audio ALC270

USB 3.0                 : Intel Panther Point PCH - USB 3.0 xHCI Controller 

Touchpad                : Elantech Touchpad v4 Hardware

Webcam                  : USB2.0 UVC HD WebCam

Card reader             : Realtek RTS5289 PCI-E Card Reader

Monitor                 : AU Optronics B156XW02 V6 WXGA 15.6 16:9 HD 1366x768

Optical Drive           : HL-DT-ST DVDRAM GT51N SCSI CdRom

Battery                 : 6Cells 4700 mAh 50 Whrs

Interface :

1 x Microphone-in jack

1 x Headphone-out jack 

1 x VGA port/Mini D-sub 15-pin for external monitor

2 x USB 3.0 port(s) 

1 x USB 2.0 port(s)

1 x RJ45 LAN Jack for LAN insert 

1 x HDMI

 
Working:
Graphics with QE/CI on Intel HD4000 GPU
Audio with AppleHDA
LAN
USB2.0 and USB3.0
Webcam
Optical Drive
HDMI
Battery
Elantech Touchpad 
Sleep, Processor P&C-States with Native power management
Fn Hotkeys
 

Not working:
Atheros AR9485 Wireless Network Adapter (need to replace with supported card)
NVIDIA® Optimus™ GeForce® GT 630M
Realtek RTS5289 PCI-E Card Reader

 
Unknown:
None
  

Issues:
VGA work but not good
 

For Installation: (Standard)
Follow the Steps in the link below, starting with Pre installation, Installation and Post Installation: 
http://www.osxlatitu.../documentation/
 

Changes:
Wifi : Original Ralink RT5390 not work (Replaced by: Atheros Ar5bhb92-h))

Optical Drive : Not Present (Replaced by SSD Crucial 128GB)

 
Custom Guide: 
What do you need:
- A USB with 8gb

- OS X bootable USB for Intel PCs (search in google)
- Files attached on this post
 
How to prepare usb install:
1- Download this OS X bootable USB for Intel PCs
2- Install RAW image on your usb (Mac OSX)
Open the terminal:
Find your USB stick
- diskutil list 
Unmount USB
- diskutil unmountDisk /dev/disk2
Copy RAW Image
- sudo dd if= [drag and drop the raw file in terminal] of=/dev/rdisk2 bs=1m
 
Wait to finish and now you have a usb install ready to copy kext and clover
 
3- Download Clover EFI,  extract and open the Clover Configurator.app
4- Mount your EFI USB partition without format and then copy EFI folder of Clover EFI into
5- Copy Apps folder into your usb install
 
So now you have a full USB Install for this Asus
 
How to install Mac OSX in your notebook:
1- Boot installation from USB
2- Format HDD on GPT
3- Select Partition to install and finish installation
4- Now we must format EFS partition to FAT32, then mount this partition and copy Clover files
(to format EFS we can do from terminal or with EFI Tools Clover EN.app (F option))
5- To install kexts use EDP system “Install_EDP.app” attached or http://argo.osxlatit...m/edp/download/
 
Or use "Kext Utility.app" if not work EDP, open, drop files of kexts folder and put your password wait until finish Add and close. Now you can restart system
(If you don't have DSDT patched use No-DSDT-Kexts so if you have use DSDT-Kexts)
 
If you don't use patched DSDT i think that you put this string on config.plist to enable HD4000
 
<key>device-properties</key>   <string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000005006201140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string>
 
6- Then go into BIOS, in Boot menu select "Add New Boot Option" and complete:
Add boot option: (put a name) for example: Clover boot
Select Filesystem: (Select HDD that have Mac OSX Installed)
Path for boot option: \EFI\CLOVER\CLOVERX64.efi
 
Select Create and put the new boot option first.
 
Check too the VRAM of HD4000 is 64MB because probably if it's changed not work 
 
Save changes and reboot
 
7- So, now when system boot show Clover bootloader and just select the Mac OSX partition and press enter
 
If you did it all Mac boot you did well 
Now put use Kext Utility.app to install RealtekRTL8111.kext and others kexts if don't work any injected (EFI/CLOVER/KEXTS/10.11) and HWMonitor.app into Applications folder if you want see temperatures and frequency and enjoy your Hackintosh!!!


What's New in Version 3.0   See changelog

Released

No changelog available for this version.




User Feedback

Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.